|
|
|
|
|
|
|
Transfer hoses are constructed of a flexible stainless steel suitable for the transfer of cyogenic fluids and are available in 4 fl . (1.2m) or 6 ft .(1.8m) lengths .Hoses are fitted with a 3/8 in . NPT male filled with a 3/8 in .NPT male fitting on one end and a CGA female fitting on the other end. |
|
|
Female End Fitting |
Hose Length |
Male End Fitting |
Part Number |
Nitrogen and Argon LIQUID or VENT Connection |
CGA 295
CGA 295 |
4 ft. (1.2m)
6 ft. (1.8m) |
3/8in.NPT
3/8in.NPT |
1700-9C65
1600-9C66 |
Nitrogen and Argon USE Connection |
CGA 580 |
6 ft .( 1.8m) |
3/8in.NPT |
GL50-8C51 |
Oxygen LIQUID or VENT Connection |
CGA 440 |
6 ft .( 1.8m) |
3/8in.NPT |
GL50-8C53 |
Oxygen USE Connection |
CGA 540 |
6 ft .( 1.8m) |
3/8in.NPT |
GL50-8C56 |
Carbon Dioxide LIQUID Gas USE Connection |
CGA 320 |
6 ft .( 1.8m) |
3/8in.NPT |
GL50-8C51 |
Carbon Dioxide Gas VENT Connection |
CGA 295
CGA 295 |
4 ft.(1.2m)
6 ft (1.8m) |
3/8in.NPT
3/8in.NPT |
1700-9C65
1600-9C66 |
|
|
CRYOGENIC PHASE SEPARATORS |
|
|
Designed to minimize hazardous splashing and vaporization , phase separators are available in three different sizes to accommodate transferring liquids into various open containers .The two larger phase separator are designed to fit the 3/8 in. NPT end of Taylor-Wharton transfer hoses . Specify quantity and size or part number. |
|
|
|
|
Model |
Part NO. |
23/4 in.×13/8in.OD(3/8 in. NPT)
(70mm ×35mm) |
1193-8C80 |
11/4in.×1in.OD (3/8 in. NPT) (32mm×25.4mm) |
1193-8C82 |
11/4in.×1/2in.OD (1/8 in. NPT) (32mm×12.7mm) |
1193-8C83 |
|
|
|
|
|
|
An External Heat Exchanger (vaporizer ) effectively increases the gaseous delivery rate of any liquid cylinder by approximately 250 cfh (7.0 cu.m/h ) air gases and 120 cfh (3.4 cu m/h) CO2 continuous at pressures up to 500 psig (34bar/ 3447 kPa ). The vaporizer is cleaned for oxygen service and comes equipped with a 3/8 in .NPT fitting to connect to a transfer hose and regulator suited to your application .Dimensions –12”×15 3/4” ×46” |
|
|
Model |
Part NO. |
External Heat Exchanger |
VP50-7C10 |
|
|
|