|
|
|
Flame Arrestor and breather valve should be equipped on the top of tank for type A and B liquid to GB50160-92, “Fire prevention code of petrol chemical enterprise design”. Breather valve and flame arrestor are indispensable safety devices. They cannot only remain tank internal normal pressure, but also prevent over pressure or vacuum in tank and reduce liquid volatilization loss in tank. Our breather valve has some good features. Such as we have recently produced a new flame breather vale, HXF-IZ, which the flame arrestor is installed the suction end of breather valve, avoiding flame into the body of breather valve. It is characterized by better inspection, clear up and replacement. |
|
Main technical parameters |
|
|
◆ The breather valve can be set on the tanks stored various liquids or gases.
◆ Operating Pressure: -295Pa (-30mmH2O)~+98000Pa (+10000mmH2O)
◆ Flame arrester grade: BS5501: ⅡA、ⅡB、ⅡC.
◆ Body Material: A3、Alumium、SS:SUS304、SUS304L、SUS316、SUS316L。
◆ Disc & Seat Material: Aluminum、SS.
◆ Seal Material: PTFE.
◆ Flanges or the valve are in accordance with HG20594-97 PN 1.0 When GB、SH、HGJ、JB、ANSI、JIS. If changed, buyer shall illustrate in the contract.
◆ Manufacture, test and inspection shall be in accordance with SY7511-87 gb5908-86, or specified by buyer. |
|
Weatherproof Breather Valve
Flame Arresting Breather Valve |
|
|
|
Body Material |
A3、Aluminum、 SS304、SS304L、SS316、SS316L ling |
Fire Arresting trim Material |
SS corrugated plate with flame arresting and anti-explosion |
Seal Material |
Asbestos、PTFE |
Flame arrester grade |
BS5501: ⅡA、ⅡB、ⅡC |
Ambient Temperature |
-30~+60 |
Operating pressure |
-295Pa~+98000Pa
(-30mm H2O~+10000mm H2O) |
|
|
DN |
L |
H |
25 |
160 |
255 |
50 |
160 |
255 |
80 |
213 |
260 |
100 |
265 |
290 |
150 |
305 |
330 |
200 |
355 |
250 |
250 |
420 |
400 |
300 |
480 |
510 |
|
|
|
Breather Valve With Double Nozzles
Flame Arresting Breather Valve With Double Nozzles |
|
|
|
|
Body Material |
A3、Aluminum、 SS304、SS304L、SS316、SS316L ling |
Fire Arresting trim Material |
SS corrugated plate with flame arresting and anti-explosion |
Seal Material |
Asbestos、PTFE |
Flame arrester grade |
BS5501: ⅡA、ⅡB、ⅡC |
Ambient Temperature |
-30~+60 |
Operating pressure |
-295Pa~+98000Pa
(-30mm H2O~+10000mm H2O) |
|
|
DN |
L |
H |
50 |
320 |
350 |
80 |
450 |
500 |
100 |
450 |
500 |
150 |
620 |
600 |
200 |
750 |
700 |
250 |
850 |
820 |
300 |
1100 |
900 |
|
|
|